Skip to main content

Hydraulic Shear C2006 CNC




Model: Hydraulic Shear C2006 CNC

The CNC Guillotine C2006 Nargesa is a new compact CNC-controlled hydraulic shear with a maximum cutting length of 2030mm and a maximum thickness of 6mm.

It belongs to the latest generation of CNC vertical cut shears made of stabilized, welded steel that allows standing big efforts without deformation.

Cutting capacity

  • Cutting length: 2030mm
  • Max. thickness in steel: 6mm
  • Max. thickness in stainless steel: 4mm

Gallery

Metalworking Machinery with Langbow

Technical features

The last generation of NEW CNC vertical cutting Shears C2006 allows you to cut any type of metal in a clean and accurate way. The vertical cut shearing is much more precise with its consequent lower energetic expense and cost of blades. The main advantages of the vertical cut in comparison to the swing cut are:

Energetic saving: 

Resistance of material in the vertical cut is much lower, resulting in considerable energetic savings.

Cutting quality: 

Clean, perfect, and accurate cut.

Life of the blades:

The blades wear is almost null. The life of the blades is four times higher than other shearing systems.

The C2006 CNC Shear is supplied as standard with the following components​:

High resistance structure

  • One block bench, mechanized, equipped with spheres to ease up the movement of the sheet.
  • Initial support machined to square of 1000mm with millimeter scale.
  • Two 1000mm millimetered stand arms.
  • LASER lightning on the cutting line.
  • LED front lightning.
  • Front polycarbonate protection screens that allow to see the cutting line.
  • Cutting of narrow strips without distortion.
  • 4-cutting edged upper and lower blades, with 90º angle, long-lasting, and proper for cutting steel.
  • Driving with safety pedal and emergency stop.
  • Back overture with safety optoelectronic devices.
  • Low noise level, improving the quality of work of the operator.
  • Ramp of material extraction located in the lower part of the cutting zone allows the material to slide down to the extraction area.
  • Cutting capacity: 6 mm in steel (450N/mm2) and 4 mm in S.S. (700N/mm2).
  • Gauge displacement: 700 mm.
  • Goose neck for cuts with bigger length: 190 mm.
  • Strokes per minute: 10 Strokes. (All length).
  • Hydraulic rammers: 10 units.
  • Fix cut inclination: 1,75º.
  • Motor power: 5,87 KW / 7,87 CV.
  • 3-Phased tension: 230/400 V. 50/60 Hz
  • Hydraulic Pump: 16 liters.
  • Container capacity: 73 liters.
  • The machine is delivered completely assembled.

Precision rear gauge

  • Rear gauge fixed to the structure.
  • Accuracy and repeatability of positioning from +/- 0.1 mm.
  • Low maintenance thanks to the use of low-friction elements.

ESA S625 compact CNC

  • The control interface is very intuitive and easy to use.
  • Internal database of materials.
  • Configuration of the piece length by the CNC.

Enhanced hydraulic group

  • Automatic regulation of the cutting pressure depending on the need for cutting power.
  • Automatic regulation of the pressure of the sheet fastenings.

All our products are manufactured in our facilities in Spain. The hydraulic and electronic components are completely standard and come from the best European leading trademarks, such as Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato, with technical service all over the world.

Close Menu